More information

ASME SA516 HIC and ASTM A516 HIC.
Compatibility with the world’s most frequently requested HIC specifications ensures that there is no need for costly and time consuming additional testing: the plate is off the shelf and ready to use.

  • Documents icon

    Available Specifications.

    CarElso HIC Premium+ is produced for Brown McFarlane to the following steel specifications and grades – more information on a grade can be seen by clicking on it:
    o ASME SA516 Grade 60
    o ASME SA516 Grade 65
    o ASME SA516 Grade 70
    o ASTM A516 Grade 60
    o ASTM A516 Grade 65
    o ASTM A516 Grade 70
    In combining these steel specifications with the CarElso HIC Premium+ manufacturing process Brown McFarlane offers ex-stock availability of steel plates that meet the world’s most stringent HIC standards.

  • Documents icon

    Manufactured – not just tested.

    With so many of the fabrications produced from HIC steel being used in such critical applications it is essential to be certain that the steel used is fit for purpose. CarElso HIC Premium+ has been produced with the sole intention of being HIC resistant: a plate with the same properties throughout every millimetre of thickness and every square metre of area.
    It is possible to take test pieces from an «ordinary» plate and subject them to rigorous and exhaustive HIC testing. If the right pieces are selected it is more than likely that they will pass the tests and can be described as HIC resistant. But just because the test pieces have passed does this mean the plate they came from is HIC resistant? It might but can anyone be entirely certain that the whole of the rest of the plate is completely the same as the test piece particularly when the plate has not been made with the intention of it being HIC resistant?
    For more detail on the importance of this subject see our Carelso HIC Premium+ technical page.

  • Documents icon

    General Supply Conditions

    Normalized 920°C. The material surface is shot blasted to SA 2.5, with low-stress die stamping at two locations: head and foot of plate. In addition, material has identification paint markings on one end and shipping marks. Plates have continuous brand marked on the two long edges.
    Processing:
    • High Definition Plasma: 16m x 4m
    • Oxy/Propane: 50m x 6m
    • Plate Rolling/Dished Ends
    Specifications:
    NDT
    Ultrasonic testing control as per SA 578 level C with +75mm pitch scanning and +100mm² max defect area.
    Mechanical Properties
    Mechanical and HIC tests after simulated PWHT at 610°C (2 min/mm). Ambient tensile properties as per standard.
    Charpy impact test longitudinal and transverse direction
    • At -51°C for thickness <= 25mm (20J average /16J individual)
    • At -46°C for thickness >25mm (41J average /34J individual)
    Chemical Properties
    Max Ceq 0.41% <= 50mm, 0.43% > 50mm
    Max S 0.001%, P 0.008%, Nb 0.015%, V 0.005%, O 0.002%
    All material is made with an Electric Arc Furnace, fully killed, vacuum degassed, with fine grain.

Applications

  • Oilfield fabrications
  • Boilers
  • Calorifiers
  • Dished ends
  • Flanges
  • Heat exchangers
  • Pipelines
  • Pressure vessels
  • Storage tanks
  • Valves, flanges and fittings
  • Condensers
  • Pipe caps/pipe fittings

Size range….

Thickness Length Width
6/8/10/13/16/20/25/30/35/40mm 12000mm 2000/2500/3000mm
45/50mm 9000mm 2500/3000mm
55/60/65/70/75/80mm 7000mm 2000/2500mm
90-200mm 6000mm 3000mm

Request product data sheet

Get in Touch